Specifications; General Specifications - Amprobe DM78B Manual De Instrucciones

Specifications

General Specifications

Display: 3-3/4 digits LCD, 10mm high digits, max reading 3200.
Units/signs: AC, R, B, mV, V, Ω, kΩ, MΩ, G. Z, H, minus, and
decimal point.
Range selection: Autoranging and manual range lock.
Overrange indication: O.L.
Polarity indication: - is displayed; + in implied.
Battery warning: B displayed when <1.25V ±0.1V.
Sampling rate: 2/sec display. 20/sec bargraph.
Temperature/Humidity:
Operation: 0° to 40°C (32° to 104°F), <70% RH noncondensing:
Storage: -20° to 60°C (-4° to 140°F), <80% RH noncondensing.
Battery type: Two 1.5V (LR-44 or NEDA#1166A)
Battery life: 70 hours continuous operation.
Continuity test: buzzer alert.
Diode check: Good/Bad by the display value.
Battery saver: Turn-off after 10 minutes of non-use.
Dimensions (HXWXD) / Weight: 4.3"X2.2"X0.40"
(111.5x56x10.5mm) / 3oz (8.6g) including case.
Included with meter: Two 1.5V (LR-44) batteries, operator's manual,
and carrying case.
Meets: EN61010-1:2001, Cat II 300V, Cat I 600V, UL1244;
EMC: Meets EN50081-1, EN50082-2
Agency Approvals:
This product complies with requirements of the following
European Community Directives: 89/336/EEC (Electromagnetic
Compatibility) and 73/23/EEC (Low Voltage) as amended by
93/68/EEC (CE Marking)
However, electrical noise or intense electromagnetic fields in the
vicinity of the equipment may distrub the measurement circuit.
Measuring instruments will also respond to unwanted signals that
may be present within the measurement circuit. Users should
exercise care and take appropriate precautions to avoid misleading
results when making measurements in the presence of electronic
interferences.
P
EMC
4