Key Menu - Milk Selection; Key Menu - Hot Water Selection; Key Menu - Steam And Air Selection - Cimbali M2 Manual Del Usuario

English

3.4 Key menu - Milk selection

Press one of the milk dispensing keys (32). The related LED
remains on and does not blink. The display appears as
follows:
! KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose

3.5 Key menu - Hot water selection

Press the hot water dispensing key (12). The following
message will appear on the display:
The following hot water selection parameters can be
modified:
- water dispensing time (from 0 to 60, with increments of
0.1 seconds).
3.6 Key menu - Steam and air selection (where contemplated)
Only on machines with the TURBOSTEAM system, without
flow regulator, with the item "regulator" set on "NO".
If the frothed milk key is pressed or the frothed milk knob (13)
is turned, the following appears on the display:
The following parameters can be modified:
- emulsion level (here 4 levels can be chosen, where 001 is
less emulsion and 004 is continuous emulsion).
The following cappuccino selection parameters can be
modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time: 0 ÷ 60 seconds, with
+
u
milk
increments of 0.1););
001
- emulsion ((foamed milk dispensing time, from 0 to 60, with
07.0
increments of 0.1 seconds);
05.0
- cold milk dose (cold milk dose; from 0 to 20 with increments
05.0
of 0.1 seconds).
u
58
! KEY MENU
Type
dispens. time
! KEY MENU
Type
emulsion level
English
+
u
water
05.0
u
+
u
steam and air
003
u