Miele professional PG 8164 Manual De Instrucciones página 8

Niche dimensions
If the machine is to be installed into a counter, the following niche dimensions must be adhered to.
Fastening the machine inside the counter is not necessary.
In the vicinity of the machine, use furniture that is appropriate for commercial areas in order to prevent a damage to
the machine due to steam.
PG 8164 PG 8165
+35
A 725 725
B 460 600
C 603 603
D 730-750 730-750
E 470-480 610-620
F 605 605
Dimensions in mm
Further machine dimensions can be found on page 1
Page 4
PG 8166 PG 8169
+35 +35
820 820
600 600
603 637
825-845 825-845
610-620 610-620
605 640
English
We recommend the assembly on 3 adjustable feet so
that the installed machine can be easily adjusted in the
height.
Remove the two rear adjustable feed (1 / 2) before
moving the machine into the niche.
Install the adjustable foot (3) with the shorter thread
(lies in the machine).
+35
M.-Nr. 10416210; 27.11.2015; msch; 89013416-en
Subject to technical alterations