AMG CANADIAN IDRO 17 Manual Del Usuario página 56

PARAMETER
Nominal heat output
Reduced nominal heat output
CO concentration at nominal reference (13% O2)
CO concentration at reduced reference (13% O2)
Nominal ef ciency
Reduced ef ciency
Flue gas rate (min-max)
Draft advised (min-max)
Flue gas temperature (min-max)
Tank capacity
Recommended fuel
Heated surface
Diameter ue outlet tube
Diameter air intake
Nominal voltage
Nominal frequency
Ignition power consumption
Power consumption (min-max)
Thermostove weight
Environmental decree n. 186 of 7/11/2017
N° Test Report
Powders at (13% O2) Ref. nominal heat input
Energy ef ciency index
N° Test Report
Environmental decree
n. 186 of 7/11/2017
Energy class
Powders at (13% O2) Ref. nominal heat input
It is recommended to control emissions after installation.
With obvious oor capacity evaluation, in the installation premises, a maximum can be deposited
of fuel, which corresponds to approx. 975kg of pellets.
In order to achieve the test report results, please load the performance parameters retained by
the manufacturer and the quali ed technician. They will use these parameters once veri ed
that, during the installation, it is possibile to reproduce the laboratory conditions.
8
Heat input
IEE
UNIT OF MEASURE
kW
kW
kW
kW
kW
mg/m
3
mg/m
3
%
%
Kg/h 0,84 - 3,79
mc
g/s 3,02 - 11,04
Pa
°C 51,1 - 103
litri
Bar
Kg
mm
mm
Inch
V
Hz
W
Kg
K 1969 2016 T1
mg/m 3
IDRO17 -DD-AU
TH17
XSAT170-DD-AU
REDONDAGLTH17-AU
18,03 17,6
17,14 16,5
4,00 5,4
13,70 15,0
3,10 4,4
48,23 42
345,4 95
94,90 94,2
97,54 95,0
1,19 - 3,66
430 430
5,5 - 10,3
3 - 8 5 -10
69 - 108
31 31
3 3
33 33
80 80
50 50
3/4 3/4
230 230
50 50
370 340
160 160
130 133
K 2841 2020 T1
A++ A++
15 12