AMG CANADIAN IDRO 17 Manual Del Usuario página 82

Menu 05 - stand-by mode
Menu 05 - stand-by mode
Press the SET key. Using the key
Press the SET key. Using the key
menu 05 and con rm with the SET key. Using the
menu 05 and con rm with the SET key. Using the menu 05 and con rm with the SET key. Using the
key (1) choose whether to enable (ON) or
key (1) choose whether to enable (ON) or
disable (OFF) the stand-by function.
disable (OFF) the stand-by function. disable (OFF) the stand-by function.
Press the ON/OFF key
Press the ON/OFF key
If enabled, the device will go to stand-by once the
If enabled, the device will go to stand-by once the
set temperature has been reached.
set temperature has been reached.
FOR AIR STOVES ONLY: In the presence of an
FOR AIR STOVES ONLY: In the presence of an
external thermostat, to go to stand-by mode, both
external thermostat, to go to stand-by mode, both
the external thermostat and the ambient probe on
the external thermostat and the ambient probe on
the stove must be satis ed.
the stove must be satis ed.
Menù 06 - buzzer mode
Menù 06 - buzzer mode
It allows you to enable or disable the acoustic
It allows you to enable or disable the acoustic
buzzer on the controller.
buzzer on the controller.
Menù 07 - start load
Menù 07 - start load
This function is only available in OFF and allows
This function is only available in OFF and allows
you to load the screw feeder on rst start-up,
you to load the screw feeder on rst start-up,
when the pellet tank is empty.
when the pellet tank is empty.
Having selected Menu 7, the writing as in Figure
Having selected Menu 7, the writing as in Figure Having selected Menu 7, the writing as in Figure
(A) will scroll on the display. Then press
(A) will scroll on the display. Then press
smoke fan switches on at maximum speed, the
smoke fan switches on at maximum speed, the
screw feeder switches on and remains on until the
screw feeder switches on and remains on until the
time indicated on the display is up or until the
time indicated on the display is up or until the time indicated on the display is up or until the
key (2) is pressed. (Figure B)
key (2) is pressed. (Figure B)
Menù 08 - stove status
Menù 08 - stove status
Displays the work status.
Displays the work status.
Menù 09 - technical calibration
Menù 09 - technical calibration
This item of the menu is reserved for the
This item of the menu is reserved for the
installation technician.
installation technician.
34
(2), go to
(2), go to
(4) to exit.
(4) to exit.
(1). The
(1). The
menù level
menù level
off
off
Menu 05
Menu 05
mode
mode
Stand-By
Stand-By
OFF
OFF
Menu 06
Menu 06
mode
mode
Buzzer
Buzzer
menù level
menù level
OFF
OFF
Menu 07
A
Menu 07
A
P1 to
P1 to
load
load
remaning time
remaning time
90
90
B
21° C 50 °C
B
21° 50
C °C
load
load
initial
initial
dialogue
dialogue
menù level
menù level
OFF
OFF
Menu 08
Menu 08
state
state
stove
stove
menù level
menù level
OFF
OFF
Menu 09
Menu 09
Key
Key
access
access
input
input