Iso Din Head Unit Provision - Metra 99-7520B Instrucciones Para La Instalación

ISO DIN HEAD UNIT PROVISION

1 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Fig. A)
3 Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
4 Slide the head unit into the radio
opening until the side clips engage.
(Fig. B)
5
Snap the Trim plate into the Radio
Housing. (Fig. C)
6
Reassemble dash in reverse order
of disassembly.
99-7520B KIT ASSEMBLY
2010 MAZDA CX7
A
B
C
5