Ddin Head Unit Provision - Metra 99-7520B Instrucciones Para La Instalación

DDIN HEAD UNIT PROVISION

1 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
Cut and remove the center bar from
the radio housing. (Fig. A)
3
Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Fig. B)
4
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit
or stacked ISO head units to the
assembly using the screws supplied
with the radio. (Fig. C)
5
Snap the double DIN trim plate into
the radio housing. (Fig. C)
6
Reassemble dash in reverse order
of disassembly.
99-7520B KIT ASSEMBLY
2010 MAZDA CX7
A
B
C
6