Power Management; The Child Safety Device - Zanussi ZEN6641XBA Manual De Instrucciones

When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
of the timer to set the time. When the time
comes to an end, the sound operates and 00
flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
LOCK
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the
heat setting.
Set the heat setting first.
To activate the function: touch
for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.

THE CHILD SAFETY DEVICE

This function prevents an accidental operation of
the hob.
To activate the function: activate the hob with
. Do not set the heat setting. Touch
seconds. comes on. Deactivate the hob with
.
To deactivate the function: activate the hob with
. Do not set the heat setting. Touch
seconds. comes on. Deactivate the hob with
.
.
.
. Touch or
.
. comes on
. The
for 4
for 4
To override the function for only one cooking
time: activate the hob with
Touch for 4 seconds. Set the heat setting in
10 seconds. You can operate the hob. When you
deactivate the hob with
again.

POWER MANAGEMENT

• Cooking zones are grouped according to the
location and number of the phases in the hob.
See the illustration.
• Each phase has a maximum electricity loading of
3700 W.
• The function divides the power between
cooking zones connected to the same phase.
• The function activates when the total electricity
loading of the cooking zones connected to a
single phase exceeds 3700 W.
• The function decreases the power to the other
cooking zones connected to the same phase.
• The heat setting display of the reduced zones
alternates between the chosen heat setting and
the reduced heat setting. After some time the
heat setting display of the reduced zones stays
on the reduced heat setting.
. comes on.
the function operates
11