Kohler K-124B16-SANA-CP Manual De Instrucciones página 11

Power Cord
9. Install DC Power Unit
IMPORTANT! Verify that you are following the correct power
system installation based on your model number. For a hybrid
power unit installation, refer to "Install Hybrid Power Unit".
Unthread the control box screws to remove the control box cover.
Unthread the battery box screws to remove the battery box cover.
NOTE: Do not mix used and new batteries.
Insert four AA batteries (provided). Reinstall the battery box
cover and secure with the screws.
Connect the power cords.
Place the battery box into the empty space within the control box.
Secure the control box cover to the control box.
IMPORTANT! The area in front of the sensor must be free of
objects during the 2 minute learning cycle or the faucet may not
function properly.
Allow 2 minutes for the sensor to cycle through the automatic
sensing distance.
Kohler Co.
Battery
Box
Power Cord
11 1386732-2-A