ENGLISH
Regularly clean the ventilation slots in your tool
u
and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a
u
damp cloth.
Do not use any abrasive or solvent-based
u
cleaner.
Regularly open the chuck and tap it to remove
u
any dust from the interior.
Protecting the environment
Z
Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
z
Separate collection of used products
and packaging allows materials to
be recycled and used again. Re-use
of recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
8
(Original instructions)
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
BLACK+DECKER provides a facility for the collec-
tion and recycling of BLACK+DECKER products
once they have reached the end of their working
life. To take advantage of this service please return
your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
BLACK+DECKER office at the address indicated
in this manual. Alternatively, a list of authorised
BLACK+DECKER repair agents and full details of
our after-sales service and contacts are available
on the Internet at: www.2helpU.com
Batteries
Z
Run the battery down completely, then
remove it from the tool.
Run the battery down completely, then remove
u
it from the tool.