Risk Category Index; Recalling Values From Memory; Clearing Values From Memory - HoMedics BPS-060 Manual De Instrucciones

RISK CATEGORY INDEX

This monitor comes equipped with a Risk Category
Index that automatically compares each reading
to criteria established by the U.S. National Institute
of Health's (NIH) National Heart Lung and Blood
Institute as described earlier in this manual, and
provides a helpful cue if your reading falls into one of
the stages that could potentially indicate increased
risk. No cue is shown if the reading falls in the
normal range as defined by NIH. Please note that
cues provided by this monitor are only intended to
assist you in using this table. The table and cues
are only provided for convenience to have access
to the NIH information. They are not a substitute
for a medical examination by your physician. It is
important for you to consult with your physician
regularly. Your physician will tell you your normal
blood pressure range as well as the point at which
you may actually be considered to be at risk.
BPS-060_B.indd 23-24 BPS-060_B.indd 23-24
(No Symbol)
21

RECALLING VALUES FROM MEMORY

1. Press the "MEM" button to
access the memory.
2. The monitor will first
display the calculated
average applied to the last 3
memories.
3. Every new press of the "MEM"
button will recall a previous
reading. The latest reading will
be recalled first.

CLEARING VALUES FROM MEMORY

Press and hold the date & time set buttons(
the same time while in memory mode and the data will
be erased automatically.
and
) at
22
5/01/10 1:27 PM 5/01/10 1:27 PM