Ryobi DUET FPR300N Manual Del Usuario

WARNING:
This How To Get Started sheet is
not a substitute for reading the operator's manual.
To reduce the risk of injury or property damage, user
must read and understand operator's manual before
using this product.
For detailed instructions on how to
perform any of the steps at right,
please see the operator's manual.
5
8 9
10
6
7
11
987000-758
5-28-09 (REV:00)
how to get started
1
2
3
For set-up when using the finish sprayer
4
or for two-person operation, please see
the operator's manual.
1
Insert paint container lid onto paint can.
2 Insert paint can into unit.
Turn the dual control knob counterclockwise to choose one person
3
operation.
4
Attach the paint tube to the quick-connect main outlet on unit.
5
Attach roller to handle.
Attach the other end of the paint tube to the quick connect outlet on the
6
handle.
Plug in the unit, place the forward/reverse switch in the forward position,
7
and turn the machine on.
Squeeze and hold the trigger on the roller handle to get paint flowing
8
through the paint tube.
9
Test the roller on a scrap surface before beginning.
10
Adjust the variable paint flow valve for desired paint coverage.
11
When finished, clean all parts before storing.