Preparing For The Installation Of The Tv - Sony SU-WL450 Información De Instalación

Preparing for the Installation
of the TV
Note
 Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
1
Attach the Table-Top Stand to
make the TV standing.
• Refer to your TV's Setup Guide.
2
Remove the stand cover and
terminal covers.
3
Remove the screws from the rear
of the TV.
4
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring
to "Supplied with SU-WL450" in
"Checking the Parts" on page
6.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
If standard mounting (2-a) is selected:
 Belt
If slim mounting (2-b) is selected:
Note
 You cannot use some of the terminals on the rear
of the TV when using this mounting style.
 Belt
− 10 (GB) −
 Pulley
 Screw
(+PSW 6 × 20)
 Screw
(+PSW 6 × 50)
 Spacer
(60 mm)
 Pulley
 Screw
(+PSW 6 × 20)
 Screw
(+PSW 6 × 20)
 Spacer
(20 mm)