Preparing For The Installation Of The Tv - Sony SU-WL450 Información De Instalación

Preparing for the installation
of the TV
1
Remove the stand cover.
(KD-55XD80 only)
2
Remove the screws from the
rear of the TV.
KD-55XD80
1
KD-49XD83/49XD80
KD-43XD83/43XD80
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
5.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
 Be sure to store the unused parts in a safe place for
future use. Retain this manual for future reference.
Standard mounting (2-a)
Belt 
− 9 (GB) −
1 2
2
2
Pulley 
Screw
(+PSW 6 x 20) 
Spacer
(60 mm) 
Screw (+PSW 6 x 50) 
GB