ausdom AH2S Manual De Instrucciones página 6

Incoming call
Dial phone number
Note:
You can press + or – button located on the side of your
headphone to adjust the volume. When the volume is
adjusted to maximum or minimum, the headphone will
sounds an alert tone.
9. Using the Headphone
The table below shows you how to use the button on your
headphone.
Action
Power On
Power Off
Pairing Mode
Play Music
Pause Music
Adjust Volume
Wireless connection
Description
Press and hold the power button for 2
seconds to power on the headphone. The
LED indicator flashes blue 1 time and sounds
a short music indicating the headphone has
been powered on already.
Press and hold the power button for 4
seconds to power off the headphone. The
LED indicator flashes red 1 time and sounds
a short music indicating the headphone has
been powered off already.
Press and hold the power button on the
headphone until it powers on but don't let go
just yet. Continue holding down on the power
button until you see
flashes blue and red alternately.It sounds an
alert tone to indicate the pairing mode has
been enabled already.
Press the power button once to continue
playing music when the music is paused.
Press the power button once to stop the
music playback.
Press the + or - button to adjust the volume.
EN-5
Hello
the LED indicator