ausdom AH2S Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
*In the paring mode, when idling more than three minutes,
the LED indicator will turn to continuous flashing blue
from flashing red and blue alternately. About 10 minutes
after flashing, the headphone will shut down automati-
cally. In the period before the headphone shut down, you
can still pair and connect the Wireless device.
11. Take Care of Your Headphone
1. Avoid exposing the headphone to rain or other liquids.
2. Avoid getting moisture or liquids into any button and
other equipments.
3. Always store the headphone upon power off and safely
protected.
4. Only use a dry cloth to wipe and clean the headphone.
5. You can use a damp cloth to wipe the ear leatherette
cushions carefully.
6. Store the headphone at a suitable temperatures between
-25
C~60
C. High temperature may damage the battery
o
o
life and reduce the battery performance.
12. Troubleshooting
Q:I can't hear anything in my headphone when using the
mobile phone.
A:Try and Check the following:
Make sure your headphone and mobile phone have been
paired and are within the allowed range.
Adjust the speaker volume on the headphone by press
the volume up button.
Q: Why doesn't my headphone work with the mobile phone?
A:Try and Check the following:
Make sure the headphone is charged. The LED indicator
is solid blue when the headphone is pairing completed.
Make sure you are within available range of the Wireless
signal.
It is a long time without pairing and connection with
Wireless device, please re-pairing again.
Q: My headphone is not charging?
EN-7

Publicidad

Tabla de contenido
loading

Tabla de contenido