Pramac Pmi3000 Manual Del Operador página 21

 With generator just stopped, muffler becomes very hot, wait until it cool before
maintenance.
 Spark arrestor should be maintained every 100 hours, in order to ensure its
performance.
1. Screw off the screw
2. Remove spark arrestor at the tail of exhaust device
3. Clean the carbon on the catching net with carbon brush
■Check if the catching net has holes or gaps, replace it if necessary.
4. Reinstall spark arrestor
5. Reinstall the back mask
Figure 15 Disassemble spark arrestor
18