Troubleshooting - Pramac Pmi3000 Manual Del Operador

9. Troubleshooting

Engine doesn't work：
Is there fuel in the fuel tank?
yes
Is the engine switch in "ON" position?
yes
Is fuel switch on?
yes
Is there enough engine oil?
yes
Spark plug has a spark?
Make sure no fuel spill around the
spark plug. Overflow fuel could catch
fire.
Fuel reaches the carburetor?
If engine still doesn't work, contact
PRAMAC service.
no
Refueling
no
Switch to "ON" position
no
Open fuel switch
no
Fill with recommended oil
no
Change spark plug
check：
1. Remove the spark plug cover and
clean around the spark plug stolen
goods
2. Remove the spark plug, put the
spark plug into spark plug cap
3. Connect spark plug side electrode to
cylinder head for ground protection
4. Pull the starter handle, the spark gap
should spark
check：
1. close fuel valve, open fuel screw
2. When opening fuel valve, fuel should
flow out from fuel outlet
20
still no
Contact PRAMAC service.