Moser 1888 Manual De Instrucciones página 10

ENGLISH
Operation
de
Preparation
en
Keep the packaging material for safe storage
or transport later.
fr
f Check that the contents are complete.
it
f Check all the parts for possible transport damage.
es
Safety
Handle with care! Damage due to incorrect
pt
power supply.
nl
f Only operate the appliance with the voltage
stated on the nameplate.
da
Charging the battery
sv
1. Connect the appliance plug (P) on the plug-in trans-
former to the charging stand socket (G) (Fig. 4ⓐ).
no
· The appliance can also be connected
fi
directly to the plug-in transformer for charg-
ing (Fig. 2ⓐ/ⓑ).
tr
· Battery overcharging is prevented thanks to
intelligent charge management.
pl
2. Connect the plug-in transformer to the mains socket
cs
(Fig. 4ⓑ).
sk 3. Switch off the appliance using the on/off switch
(Fig. 3).
hr
4. Place the appliance in the charging stand (Fig. 4)
or connect directly to the plug-in transformer
hu
(Fig. 2ⓐ/ⓑ). The charging process starts.
sl
· During the charging operation, the on/off
switch (B) flashes white. The charge status
ro
of the battery (C1) is shown on the display
by corresponding battery power indicator
bg
bars. When the battery is fully charged, all
bars on the battery power indicator and the
ru
on/off switch are illuminated.
· The accuracy of the battery power indica-
uk
tor can be increased by fully discharging
the battery from time to time and then
et
recharging it in one uninterrupted charging
process.
lv
It should take around 60 minutes for the
·
appliance to charge to full capacity.
lt
5. As soon as the battery is fully charged, all bars on
el
the battery power indicator and the on/off switch are
illuminated.
ar
10
Battery operation
1. Switch on the appliance using the on/off switch
(Fig. 3).
· The appliance has three speed settings
S1 - S3. The speed setting is shown on the
display by the speed indicator (C2).
· The desired speed setting can be selected
by keeping the on/off switch pressed. The
appliance changes the speed setting every
two seconds. Release the on/off switch
when the desired speed setting has been
reached.
· When the appliance is switched on, it is set
to the speed setting used last.
2. Select the desired speed by keeping the on/off
switch pressed (Fig. 3) and then release it when the
desired speed setting has been reached.
· The charge status of the battery is dis-
played by the battery power indicator (C3).
· The battery operating time depends on
the selected speed setting, the frequency
of use and the ambient temperature. It
should be from approx. 85 minutes to max.
120 minutes.
· The battery of the appliance should be
charged when the warning symbol and the
empty battery power indicator are flashing
(C4).
· In case of insufficient maintenance of
the blade set, the operating time can be
reduced considerably.
3. Use the on/off switch to switch off the appliance
after use (Fig. 3).
Mains operation
1. Connect the appliance plug (P) on the plug-in trans-
former to the appliance socket (D) (Fig. 2ⓐ).
2. Connect the plug-in transformer to the mains socket
(Fig. 2ⓑ).
3. Switch on the appliance using the on/off switch
(Fig. 3).
4. Select the desired speed by keeping the on/off
switch pressed (Fig. 3).
5. Use the on/off switch to switch off the appliance
after use (Fig. 3).