Care And Servicing Of Your Andis Trimmer Blades - Andis CLT Instrucciones De Uso Y Cuidado

Ocultar thumbs Ver también para CLT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
REPLACEMENT (REMOVAL) OF BLADE SET
When removing the blade, turn the trimmer OFF. Push the blade away from
the trimmer with your thumb, and the blade will pop off (Figure I). To
replace or change the blade set, fit the plastic tab on the blade set into the
notch located at the bottom of the trimmer opening. Firmly push the blade
into the trimmer housing and it will snap into place (Figure J).
BLADE TEMPERATURE
Due to the high speed nature of Andis trimmers, please check for blade
heat often, especially on close cutting blades. If blades are too hot, dip the
blades only into Andis Blade Care Plus or apply Andis Cool Care Plus and
then Andis Clipper Oil.

CARE AND SERVICING OF YOUR ANDIS TRIMMER BLADES

The blades should be oiled before, during, and after each use. If your
trimmer blades leave streaks or slow down, it's a sure sign that the blades
need oil. Place a few drops of Andis Clipper Oil on the front and side of the
cutter blades (Figure K). Wipe excess oil off the blades with a soft dry cloth.
Spray lubricants contain insufficient oil for good lubrication, but are an
excellent trimmer coolant. Always replace broken or nicked blades to
prevent injury. You can clean the excess hair from your blades by using a
small brush or old toothbrush. To clean the blades we suggest immersing
the blades only into a shallow pan of Andis Blade Care Plus, while the
trimmer is running. Any excess hair and dirt that has accumulated between
the blades should come out. After cleaning, turn your trimmer off, dry the
blades with a soft, dry cloth and start clipping or trimming again.
USE GUIDELINES FOR LITHIUM-ION BATTERIES
1. The lithium-ion battery included with your trimmer does not develop a
"memory effect" like a nickel-metal hydride (NiMH), or nickel cadmium
(NiCd) battery. You can return the clipper to the charger at any time for a
full charge, or even use the battery before a charge cycle is complete.
Like most rechargeable batteries, lithium-ion batteries perform best when
used frequently.
2. For maximum battery life, store the trimmer in a partially discharged
condition if the unit will be unused for several months.
3. Do not store trimmer uner 50°F or over 104°F. Do not expose trimmer to
excessively damp conditions.
4. Avoid locating the trimmer near heat vents, radiators, or in direct
sunlight. Optimum charging will result where the temperature is stable.
Sudden increases in temperature can result in the battery receiving less
than a full charge.
5. Many factors influence lithium-ion battery life. A battery that has received
heavy use or is more than a year old may not give the same run-time
performance as a new battery pack.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido