Bellman Audio Mino Manual Del Usuario página 114

Appendix
Settings
Bellman Audio Mino has more settings than those you can access in user mode.
By going into the Settings Menu you can adjust settings that you do not normally
need to change or which are adjusted when first used and never need to be
changed again.
Settings Menu
How to get into the Settings Menu.
•
Start the unit by pressing the On/Off button
• Hold down the On/Off button
(10) within 1 second until the T LED (4) starts to blink.
• When the T LED (4) starts to blink, you can release both the buttons.
• Press and hold down the T button (7) within 2 seconds of the moment the T
LED (4) starts to blink.
• Release the T button (7) immediately once the T LED (4) has gone out.
You are now in Balance Control mode.
Overview of the Settings Menu
In the Settings Menu you can switch
between the different settings by
pressing the T button (7) or
the button (5). Each
M
press of the T button
moves you clockwise on
to the next setting in the
list and the
M
takes you anti-clockwise
to the previous setting in
the list.
When you have finished
adjusting your settings,
give a short press on the
On/Off button
return to normal user
mode.
114
button
(6) to
i
(6).
i
(6) and press down the Volume
i
button
-