Sauder 422180 Instrucciones De Montaje página 20

Step 16
With your hand, separate the BUSHINGS from a SHOE RACK MECHANISM (148M) as shown in the upper diagram. Trim the
å
edges of the BUSHINGS for excess sharp plastic not needed for proper function. The BUSHINGS will be used in steps 17 and 23.
Excess plastic may be attached to the SHOE RACK MECHANISM (148M) that may need to be trimmed for a smooth
å
surface as shown in the lower diagram.
Repeat this step fi ve times.
å
LARGE BUSHING
WITH LARGE HOLE
148M
Page 20
LARGE BUSHING
WITH SMALL HOLE
Trim these edges for excess
sharp plastic not needed.
148M
422180
SMALL
BUSHING
Trim edges of the BUSHINGS
for excess sharp plastic not
needed for proper function.
BUSHING
www.sauder.com/services