Gg Black 9/16" Pan Head Screw; Brown 7/16" Large Head Screw - Sauder 410627 Manual De Instrucciones

Step 10
Carefully turn your unit over onto its front edges. Unfold the BACK (G) and lay it over your unit.
å
Fasten the BACK (G) to the LEGS (I and J). Use eight BROWN 7/16" LARGE HEAD SCREWS (II). Fasten the
å
remaining BACK (G) to your unit using the NAILS (KK).
NOTE: Be sure to tap NAILS into the holes that line up over the SHELF (F).
å
NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed.
å
Fasten the FOOT BASE (U) to the EXTENSION BLOCK (K). Use four BLACK 9/16" PAN HEAD SCREWS (GG).
å
Then, push the FOOT (T) into the FOOT BASE (U).
NOTE: Turn the adjustable end of the ADJUSTABLE FOOT completely in. Final adjustments will be made after
å
the unit is standing upright.
These holes must line
up over the SHELF (F).

BROWN 7/16" LARGE HEAD SCREW

(8 used in this step)
Page 14
K
J
II
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
G
T
U
KK
NAIL
(33 used in this step)
410627
I
Turn completely in.
BLACK 9/16" PAN HEAD SCREW
(4 used for the FOOT BASE)
www.sauder.com/services
GG