Black 9/16" Pan Head Screw - Sauder Heritage Serie Manual De Montaje

15 15
11J
Carefully stand your unit upright.
Fasten the LOCK (11J) to the inside of the LEFT UPRIGHT (D2). Use two BLACK 9/16" PAN HEAD SCREWS (25S) through the
small holes in the LOCK and into the small pre-drilled holes in the inside of the LEFT UPRIGHT (D2).
Insert the LOCK RING (10J) over the key extension on the LOCK. When the drawers are locked, the metal bars on the LOCK will
extend beyond the LOCK BRACKETS (9J) on the large drawers in step 18. You may need to loosen the SCREWS that fasten the
LOCK BRACKETS and adjust the BRACKETS in or out.
Page 20
D2
10J

BLACK 9/16" PAN HEAD SCREW

(2 used in this step)
www.sauder.com/services
25S
402159