Before Starting The Engine - Atlas Copco HYDRAULIC PAC 30 Instrucciones Para El Operario

English
Engine and electrical system
Engine
Model Type
Hydraulic Pac 30 Honda GX390 13 HP (9,6 kW)
The performance figures quoted are produced at a
speed of 3600 rev/min (maximum permissible engine
speed).
Engine speed is controlled automatically by a small
hydraulic ram which is activated by the hydraulic
circuit oil pressure.
Consult the Engine Manufacturer's Handbook for
details of the engine and electrical circuits.
Before operating the machine
The following checks should be made each time you
return to the machine after leaving it for period of
time. All these checks concern the serviceability of
the machine. Some concern your safety.
Check for Cleanliness
• Remove dirt and debris especially from around
the linkages, rams, and hydraulic oil cooler.
• Clean all safety decals. Replace any that are
missing or cannot be read.
Check for Damage
• Inspect the machine and hoses generally for
signs of damage and missing parts.
• Check for fluid and fuel leakages beneath
the machine.
Check for Security
• Check the security of the hinged frame.
• Make sure the fuel filler cap is tightly closed.
Check Hydraulic Oil Level
• Check the hydraulic oil level and add as
necessary.
4

Before starting the engine

Position the Machine
Performance • Ensure the machine is positioned safely.
Complete a Pre-start Inspection
• If you have not already done so, complete a
pre-start inspection. Refer to Before Operating
the Machine.
• Ensure that all hydraulic couplings are fully
serviceable.
• Ensure that any hydraulic tools you are planning
to use are compatible with the model of the
machine you are using, see Specification.
Check Engine Oil Level
• Check the engine oil level and add oil as
necessary.
Check the Fuel
• Ensure that you have adequate fuel for the job.
Top up the fuel tank as necessary, taking care
not to overfill. Never refuel with the engine
running.