Filling The Water Tank - Pur Line RAFY SC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

FILLING THE WATER TANK:

Before using cool function, pour water into the water tank. Open the water tank, and slowly pour
water inside.
ATTENTION:
- Pay attention to the water level mark on the water tank before pouring water.
- Make sure to use clean tap water.
- Includes 2 ice packs.
- Do not put the ice pack into when the water tank is full, the water may overflow.
- Before using, add water to the ICE BOX not more than MAX. Do not put the inside gel
directly into the water tank.
-The ice pack should be frozen before using.
- Keep the ice pack away from children and animals.
CONTROL PANEL AND LED DISPLAY
6
7
8
9
10
POWER ON/STAND BY
Connect to electric supply, indicator
flash slowly from dark- bright- dark-bright, the appliance is in standby mode.
1. Press the button
temperature. The appliance starts to work, with wind at low speed. Indicator light
2. Press the button
light blinks.
SPEED
Press
to set fan speed at high - medium- low in circle. The indicator light turns on as follows:
• High speed: red light
• Medium speed: blue light
• Low speed: green light
Press
to activate the maximum speed.
1
turns ona nd the device emits a short "BEE" sound, and the light will
to turn on the appliance, the indicator
again to turn off the appliance. The appliance stops working immediately, STANDBY
EN
1. Power / Standby
2. Cool
3. Maximum ventilation speed
4. Natural wind mode
5. Sleep mode
5
6. Vertical oscillation
7. Horizontal oscillation
8. Timer
9. Speed: L- M - H
4
10. Water shortage warning
3
2
turns off and LED screen shows ambient
12
turns on in green.

Publicidad

Tabla de contenido
loading

Tabla de contenido