Warnings and Cautions
Cautions
A caution indicates a condition that may lead to equipment damage, malfunction, or inaccurate operation.
1. Keep the unit away from any heated surface.
2. Do not scratch, damage, or soil the ferrule end of the panel. Also, do not place sharp or heavy items
on the panel, this can damage the panel and affect its light output.
3. Do not dry the fiberoptic panel with artificial heat.
4. Allow the unit to cool 10 minutes before moving.
Symbols
Attention: read accompanying documents
Type BF applied part
Caution, Hot Surface
Caution, High Voltage
Alternating Current
REF
Part Number
SN
Serial Number
I
On (power:connection to the mains)
O
Off (power: connection to the mains)
Electromagnetic Compatibility
The Wallaby 3 Phototherapy System complies with Electromagnetic Compatibility Standards for Medical
Devices. If you suspect that the Wallaby 3 is interfering with the operation of other appliances or if they
are interfering with the Wallaby 3:
Move the Wallaby 3 away from the appliance
Connect the Wallaby 3 and the appliance to different AC outlets so that they are operating off of
different circuit breakers
Classification
The Wallaby 3 Phototherapy System is classified as:
IEC Class I Equipment
Type BF Applied Part
Ordinary protection against the ingress of liquids
Not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or
nitrous oxide
Continuous operation
6