Connecting To Your Computer - Conceptronic CSM3PL Guía De Instalación Rápida

ENGLISH
3. How to connect the Grab'n'GO 3,5" Media Player with Cardreader

3.1 Connecting to your Computer

1. Turn on your computer.
2. Connect the powersupply to the CSM3PL and to the power outlet.
3. Connect the USB Cable to the CSM3PL and your computer.
The computer will automatically detect and configure the device, assign new drive letter(s), and
then use it as a mass storage device. (Your drive is pre-formatted in FAT32 file system).
You can now add movies,music,photo's, etc. to the CSM3PL.
Disconnect the CSM3PL from your computer
1. Single-click the "Safe Removal" icon on the systemtray.
2. Select "Stop USB Mass Storage Device" when prompted.
3. Wait for the message "Safe to remove Hardware".
4. Disconnect the USB cable.
22
1