Connecting To Your Computer - Conceptronic CMED2PRO Guia Del Usuario

ENGLISH
4. How to connect the Media Player

4.1 Connecting to your Computer

A.
Turn on your computer.
B. Connect the powersupply to the CMED2PRO and to the power outlet.
C. Connect the USB Cable to the CMED2PRO and your computer.
The computer will automatically detect and configure the device, assign new drive letter(s), and
then use it as a mass storage device. (Your drive is pre-formatted in FAT32 file system).
You can now add movies,music,photo's, etc. to the CMED2PRO.
Disconnect the CMED2PRO from your computer
A. Single-click the "Safe Removal" icon on the systemtray.
B. Select "Stop USB Mass Storage Device" when prompted.
C. Wait for the message "Safe to remove Hardware".
D. Disconnect the USB cable.
4.2 Connection to your Television
The Conceptronic CMED2PRO can be used with a television.
You can connect to the TV with the following connections:
- Composite Video
- Component Video
Please check the manual of your TV to select to correct input channel to display the video
output of the CMED2PRO.
Use the OUTPUT button on your remote control to change the VIDEO output signal of the
CMED2PRO.
For the sound output of the Conceptronic CMED2PRO, you can use the analog RCA Jacks on the
Composite A/V cable.
If you use the Component Video cable, you can use the Composite A/V cable for the sound
output.
A. Plug the power adapter into a working electrical outlet and connect the other end of the
adapter to the Media Player.
B. Connect one of the supplied video cables (Composite, Component) to the Media Player and to
your TV.
C. Turn on the Media Player wih the Power Button on the top, or the Power Button on the
remote control. The Player Mode LED on top of the Media Player will turn blue when the
device is turned on.
Note: Make sure there are no Memory Cards in the card slots of the Media Player during boot. This
can cause a faulty initialization, which makes the Media Player unusable.
When this happens, turn off the Media Player, remove the Memory Card(s) and turn the
Media Player on.
23
A