Silverline 264125 Manual De Instrucciones página 7

Ocultar thumbs Ver también para 264125:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
264125
Accessories
• A full range of sanding sheets and accessories is available from your Silverline
dealer
Maintenance
WARNING: Always disconnect from the power supply before carrying out any
inspection, maintenance or cleaning.
General inspection
• Regularly check that all the fixing screws are tight. They may vibrate loose
over time
• Inspect the supply cord of the tool, prior to each use, for damage or wear.
Repairs should be carried out by an authorised Silverline service centre. This
advice also applies to extension cords used with this tool
Cleaning
WARNING: ALWAYS wear protective equipment including eye protection and
gloves when cleaning this tool.
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear
quickly, and shorten the device's service life
• Clean the body of your machine with a soft brush, or dry cloth
• Never use caustic agents to clean plastic parts. If dry cleaning is not sufficient, a
mild detergent on a damp cloth is recommended
• Water must never come into contact with the tool
• Ensure the tool is thoroughly dry before using it
• If available, use clean, dry, compressed air to blow through the ventilation holes
(where applicable)
Hook and loop surfaces
• Hook and loop surfaces need to be clean, free of dirt and foreign matter, such
as hair, fibres, sand etc.
• In order to provide adequate adhesion for securing accessories, hook and loop
surfaces must be in good condition
• When used extensively, hooks and loops will become elongated or broken, and
the mechanism will be unable to provide the required strength of adhesion
Note: This sander's hook and loop Sanding Base (3) is NOT a warranty item.
Replacement plates can be fitted at an authorised Silverline service centre.
Storage
• Store this tool carefully in a secure, dry place, out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no
longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct way
to dispose of power tools
150W Orbital Sander
www.silverlinetools.com
1
Sheet
3
7

Publicidad

Tabla de contenido
loading

Tabla de contenido