Confi guration Set-up-Menu MISTRAL SYSTEM
e-Drive
Function
Press e-Drive 1× short = activate
Press e-Drive for 3 seconds = confi rm
Note:
If e-Drive is pressed briefl y 1x without confi rmation, the values will not be saved.
Switch on mains
Standby Modus
Temperature unit
1× short
Temperature limitation 45 °C – 650 °C
1× short
Heating interface setting
1× short
26
Operating mode
3 seconds
e-Drive
Function
Turn to right
Turn to left
Set-up-Menu
&
Increase temperature turn e-Drive to right
Reduce temperature turn e-Drive to left
0 – 10 Volt
Next Page
Press for 2 seconds and slowly
turn 1/4 revolution to the right at
the same time
3 seconds
3 seconds
3 seconds
4 –20 mA