Chauvin Arnoux C.A 6608 Manual De Instrucciones página 15

not more than 2000m. The instrument can therefore be used in
complete safety on 400V and 690V three-phase networks in an
industrial environment.
For safety reasons, you must use only measurement leads
having a voltage rating and category at least equal to those of the
instrument and compliant with standard IEC 61010-031.
Do not use if the housing is damaged or not correctly closed.
Do not place your fingers near unused terminals.
If the instrument is used other than as specified in this
manual, the protection provided by the instrument may be
impaired.
Do not use this instrument if it seems to be damaged.
Check the integrity of the insulation of the leads and of the
housing. Replace damaged leads.
Be prudent when working in the presence of voltages
exceeding 70Vdc or 33Vrms and 46.7Vpp; such voltages can
cause a risk of electrocution. The use of individual protections is
recommended in some cases.
Always keep your hands behind the physical guards of the
probe tips or alligator clips.
Always disconnect all leads from the measurement and from
the instrument before opening the housing.
English
15