Cleaning, Care And Maintenance; Cleaning With The Cleaning Brush - Silvercrest SLS 3 A1 Instrucciones De Uso

Cleaning, care and maintenance

CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents to clean this
appliance. This will irreparably damage the appliance.
NOTE
► As soon as the shave becomes noticeably worse, we recommend replacing
the shaver unit
To order a new shaver unit
section "Ordering replacement parts"). Have the IAN number of the item to
hand. You will find this on the front page of these operating instructions or
in the section "Service".

Cleaning with the cleaning brush

Shaving head/shaver unit
Clean the shaving head
1) Press the two release buttons
appliance.
2) Tap the shaver unit
the cleaning brush
3) Use the cleaning brush
Trimmer
■ Clean the trimmer
■ Oil the trimmer
■ Turn on the shaver for a short while to distribute the oil on the blades.
│ GB │ IE
■ 20
.
, please contact the service department (see
under the shaver unit
and pull the shaver unit
on a flat surface and blow off the hair cuttings. Use
if necessary. Blow loose hair from the shaving foils.
to clean the shaving head
after every use with the supplied cleaning brush
roughly every 6 months with a drop of sewing machine oil:
with the cleaning brush
upwards off the
.
.
.
SLS 3 A1