Trimmer/Long Hair Trimmer; Cleaning And Care; Cleaning With The Brush - Silvercrest SRR 3.7 C3 Instrucciones De Uso

Trimmer/long hair trimmer

To shape your beard, form sideburns or shave eyebrows, use the
long hair trimmer
1) To do this, push the catch
The long hair trimmer
2) Press the On/Off switch
and the long hair trimmer
3) Once you have finished trimming, press the On/Off switch
again to turn off the appliance. The blue control lamp
goes out.
4) Clean the long hair trimmer
more thorough cleaning, read the section "Cleaning and care".

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Before cleaning the device, disconnect the mains adapter
from the mains power socket! There is a risk of electric shock!
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents
to clean this appliance. This will irreparably damage the
appliance.

Cleaning with the brush

Cutting unit
Clean the 3 shaving heads of the cutting unit
using the brush
1) Take hold of the cutting unit
recesses
│ GB │ IE
■ 34
.
flips out.
, the blue control lamp
.
and pull it off.
towards the long hair trimmer
. The shaver starts the cutting unit
with the supplied brush
after every shave
with three fingers in the grip
.
lights up.
. For a
SRR 3.7 C3