Kenwood SB260 Serie Instrucciones página 4

before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
G
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first
time
G
Wash the parts: see 'care and
cleaning'.
key
stirrer
cap
lid
goblet
handle
tap assembly - tap lever
tap assembly
sealing ring
blade assembly
power unit
cord storage
to use your smoothie
blender
1 Fit the sealing ring over the blade
assembly.
2 SB260 series
Screw the blade assembly onto the
goblet.
SB270 series
To fit the blade assembly to the
goblet, line up the
the blade assembly with the
symbol on the goblet. Then turn to
the symbol to lock into place.
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position
4 Place the assembled goblet on the
power unit.
5 Place the liquid ingredients into the
goblet.
- tap body
symbol on
G
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to
the level marked LIQUIDS for either
2 or 4 servings.
6 Add ice or frozen ingredients to the
goblet.
G
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These
can be added up to the level
marked FROZEN INGREDIENTS
for the corresponding number of
servings.
7 SB260 series
Screw the lid onto the goblet.
SB270 series
Push the lid onto the goblet.
8 Either push the cap into the lid or
place the stirrer in the hole.
G
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen foods
with liquids are used.
9 Plug in. (SB270 series - the base
will illuminate).
10 Press the low ' ' button for up to
30 seconds, this is to start the
mixing process, then press the
high ' ' button. Allow the
ingredients to blend until smooth.
G
Use the stirrer by moving it in an
anti clockwise direction.
11 Place a glass underneath the tap,
press the low ' ' button and pull
forward the dispensing tap lever.
G
Thinner drinks may dispense without
having to switch on the power unit.
G
Use the stirrer to assist when
dispensing thick smoothie drinks.
G
To help dispense the last amount
of a thick smoothie drink, add a
few tablespoons of liquid to
increase the flow.
G
When the glass is full, switch off
and release the lever. Unplug after
use.
OR
Switch off ' ', remove the goblet
and pour the drink. Unplug after
use.
.
4