Nice OXI Instrucciones Y Advertencias Para La Instalación Y El Uso página 15

4.4 - "Transmitter keys release" function" (only with O-Code and O-Code/A encoding)
During normal use of the transmitter, when a pressed key is released the automation's manoeuvre continues
for a short pre-set time. If the manoeuvre must be interrupted exactly when the key is released (for example,
to perform a minor adjustment), this function must be enabled in the receiver through the O-Box programmer.
This function is disabled by default.
4.5 - Enabling (or disabling) the receivers to send/receive radio commands through the BUST4 net-
work that connects two or more automations
If one of the automations in systems containing multiple automations connected through the "BusT4" must be
commanded from a distance exceeding the radio range of the transmitter-receiver system, this function can
be enabled in the receivers involved to increase their reception range. In this way, the receiver that received the
command via radio can retransmit it through the BusT4 cable to the destination receiver (in which the identifica-
tion code of the transmitter that sent the command is memorised), so that the latter can execute the command.
This function is disabled by default. To enable (or disable) the repetition and/or reception of the code via BusT4,
programme the relevant receivers appropriately through the O-View and O-Box programmers.
4.6 - Blocking access (through password) to the receiver programming
This function activates in the receiver (with the O-Box / O-View programmer) a password consisting of maximum
10 characters, chosen by the installer. The function allows for protecting all the settings already effected in the
receiver; moreover, it also prevents any subsequent settings through key A of the receiver (Fig. 1) or through
the O-Box and O-View programmers, if the password is not known.
English - 14