Saris THE T-RAX SPORT Manual De Instalación página 3

ADJUST ARMS ON CARRIER:
15
Unhook clasp and pull pin
from the rack.
MOUNT BIKES TO CARRIER:
18
Place bikes on carrier arms, alternat-
ing direction of handle-bars. The pur-
chase of Saris Protect-O-Pads(#2060)
is recommended to protect contact
areas. Make sure foam pads are free
of debris as it could scratch vehicle's
finish. Cover inner pedal of first bike
to avoid potential scratching of vehicle
finish.
16
Rotate arm up and out away
from vehicle. Align holes and
insert pin.
Rest cross tube in hold-down saddles. Note: To aid in
positioning of bicycles, hold-downs can be slid along arm
tube. Press the yellow button on stabilizer arm to move
the stabilizer into position to fit snugly against bicycle
down tube.
Note: Cable locks can be used to secure bikes to rack
(#981 locking cable recommended)
To secure arm, be sure that the
clasp is closed.
19
17
Press yellow
button and
rotate/ slide
along tube