Before Starting - Electrolux AEG VivaQuickstop Serie Instrucciones De Uso

Tabla de contenido

Publicidad

11
12
13
14
15
6
2191133-07u.indd 6
All manuals and user guides at all-guides.com
Deutsch
Vorbereitungen
11
Frontabdeckung des Geräts öffnen und kontrollieren,
dass Staubbeutel s-bag® und Kombinationsfilter (Mo-
torfilter + Mikrofilter)* / Motorfilter* eingesetzt sind
(siehe auch "Filterwechsel").
1* Hintere Abdeckung* des Geräts öffnen und kontrol-
lieren, dass Abluftfilter* eingesetzt ist.
13 Schlauch einführen, bis Verriegelung einrastet. Zur
Freigabe des Schlauches Verriegelung drücken.
14 Verlängerungsrohre* oder Teleskoprohr* durch
16
Drehen und Zusammenschieben an Schlauchgriff und
Bodendüse anbringen. (Zum Zerlegen drehen und
auseinanderziehen.)
15 Elektrokabel herausziehen und an Steckdose an-
schließen. Der Staubsauger verfügt über eine automa-
tische Kabelaufwicklung. Nach dem Herausziehen des
Kabels arretiert die Kabelaufwicklung.
16 Zum Zurückspulen des Kabels Fußpedal drücken. Das
Kabel wird dann aufgewickelt.
17a Zum Einschalten des Staubsaugers Leistungsregler in
Richtung "Ein" schieben. Saugleistung durch Schieben
17a
des Leistungsreglers in Richtung "Max" erhöhen. Zum
Ausschalten des Staubsaugers Leistungsregler in die
entgegengesetzte Richtung in die Stellung "Aus" schie-
ben.
17b* Die Saugleistung kann auch mithilfe der Saugs-
teuerung am Schlauchgriff eingestellt werden.
18a Praktischer Power Clip, der den Staubsauger automa-
17b
tisch ausschaltet, wenn die Düse bzw. der Schlauch hier
platziert wird. Ideale Parkposition für Arbeitspausen
und (18b) Aufbewahrung.
17c
18a
18b
* Nur bestimmte Modelle.
English
Before starting
11
Open the front cover on the machine and check
that the dust bag s-bag®, and the combination filter
(motor+micro filter)*/ motor filter* are in place. (See
also Replacement of filter)
1* Open the back lid* on the machine and check that the
exhaust filter* is in place.
13 Insert the hose until the catches click to engage (press
the catches to release the hose).
14 Attach the extension tubes* or telescopic tube* to
the hose handle and nozzle by pushing and twisting
together. (Twist and pull apart to dismantle.)
15 Extend the electric cable and connect it to the mains.
The vacuum cleaner is fitted with a cable winder. Once
the electric cable has been extended, it stays in that
position.
16 To rewind the cable, press the cord rewinder pedal. The
cable will then rewind.
17a Start the vacuum cleaner by sliding the power control
in the "On" direction. Increase suction power by sliding
the control further up to "Max" position. Stop the
vacuum cleaner by sliding in the opposite direction to
"Off" position.
17b* Suction power can also be adjusted by using the suc-
tion control on the hose handle.
18a Practical on/off Power Clip, the Power Clip automati-
cally turns the vacuum cleaner off when nozzle/tube
is placed here. Ideal parking position for pausing and
(18b) storing,
* Certain models only.
9/14/05 11:50:06 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido