Product Description; General Description; Areas Of Application - Renfert SILENT TS2 Manual Del Usuario

3. Product Description

3.1

General Description

This device is a workbench extraction unit for the extraction of dusts generated in a dental laboratory.
The extraction unit compiles two suction hoses to which one extraction point each may be connected.
The extraction unit can be operated both manually and automatically, depending on the connected,
electrical, dust-generating equipment.

3.1.1 Areas of Application

In the dental laboratory different areas of application are possible.
Depending on the amount of dust to be extracted and the extraction performance available, both suc-
tion hoses can either operate together, or if preferred, each tube alternately.
Standard Workbench (WB)
Work Preparation (WP)
Device (D)
Recommended use of the suction hoses:
WB + WB Suction hoses A and B simultaneously
WB + WP Suction hoses A and B simultaneously
WP + WP Suction hose A or B alternatively
D + D Suction hose A or B alternatively
WB + D Suction hose A or B alternatively
WP + D Suction hose A or B alternatively
Area of application
Grinding, separating, polishing, etc. of different dental materials
such as alloys, acrylics, porcelains, plasters, etc. in normal amounts
using the technician's hand piece.
Mainly grinding plasters and acrylics in large amounts using the
technician's hand piece
Dust intensive devices such as the fine / recyclable sandblaster, etc.
- 5 -
EN