Function Buttons - Hamilton Beach 31151 Manual De Instrucciones

840182000 ENv13.qxd:Layout 1
Quick Guide
CONTROL PANEL
6/8/10 2:33 PM Page 5

FUNCTION BUTTONS

SET THE TIMER
LED
Display
Timer can be set to override the preset 2-hour auto shutoff in Bake, Convection Bake, or Broil modes.
It is not an option in Toast mode.
1. Press TIMER button to activate. The LED will flash.
2. Rotate the selector knob to adjust cooking time up to 2 hours.
3. Press PUSH TO START or wait 5 seconds. Display will stop flashing and timer will begin.
Mode
4. To adjust DURING a cycle, press the selector knob. When the LED flashes, rotate knob until the new time
Buttons
shows in the display. Press PUSH TO START.
SET THE TEMPERATURE
Function
The Temperature button is active in Bake or Convection Bake modes.
Buttons
1. Press TEMPERATURE button to activate. The LED will flash.
2. Rotate the selector knob to the desired temperature.
3. To adjust DURING Bake modes, press the selector knob. When the LED flashes, rotate knob until the new
temperature shows in the display. Press PUSH TO START.
CANCEL AND SELECT ANOTHER FUNCTION OR MODE
The STOP/CANCEL button shuts off the oven and cancels any programmed cooking and timing functions.
1. Press STOP/CANCEL to cancel.
2. Press new function button, mode button, and rotate selector knob to adjust settings.
5