Installing
─
Fold down the rear backrests.
CAUTION
The safety grille cannot be folded up or down
when a cargo compartment cover is installed.
Tip: It is easier if two people install the safety
grille.
─
Take the screws and place them in the roof
mountings above the rear side windows. Move
the screws forward to the smaller cutouts (1).
─
Insert the safety grille through the rear door.
Align the grille's mounting in the roof mounting
on one side (2).
─
Press in the safety grille's sprung mounting
towards the roof mounting and align it with the
other mounting in the roof mounting on the
other side.
─
Install the washer and the dome shaped nut
on each side and tighten by hand.
Safety grille EN
NOTE
Beware of painted surfaces and roof panels.
5