Attaching The Fan Blades; Installing The Mounting Plate - AirPro Progress Lighting P2592 Manual De Instalación

Attaching the Fan
Blades
Fasten the blade assembly to the motor using the
motor screws provided. Be sure to tighten all
screws. (Fig. 12)
Screws
Figure 12
7.
Installing the Mounting
Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 13)
Motor
Blade
Mounting plate
Mounting ring
Screws
Figure 13