Testboy Car Tester Instrucciones De Empleo página 10

3.) Battery testing
®
Crocodile clamp on negative pole of the battery, test probe of Testboy
Car Tester on positive pole. The LED (+) lights up when voltage is
present.
4.) Hedlight / rearlight test
Attach crocodile clamp to earth and test probe to lamp socket.
5.) Testing leads
Attach crocodile clamp to earth. Pull back pin by means of push
mechanism, clamp the car lead into wedge and pierce with pin, the LED
(+) lights up when voltage is present.
After voltage test minute hole in lead closes again.
6.) Lead test positive / negative
Pierce car lead, attach crocodile clamp to positive or negative pole of
battery.
The LED (+) lights up when placed on a negative pole, thus showing
that a positive lead is present. The reverse being the case for a
negative lead.
Declaration of conformity
The product conforms to the most recent directives. For more infor-
mation, go to www.testboy.de
Fields of application
The tool is intended for use in applications as described in the operating
instructions only.
Any other form of usage is not permitted and can lead to accidents or
destruction of the device. Any misuse will result in the expiry of all
guarantee and warranty claims on the part of the operator against the
manufacturer.
10