Philips Norelco SPECTRA 8 8846XL Manual De Instrucciones página 16

8845XL 8846XL.QXD
ENGLISH
16
C
C
C
C
2/25/04 3:44 PM
Once A month: Razor Heads
◗ Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF, remove the charging plug
from the outlet and cord from the razor.
2 Press the razor head release button, open
and lift off the razor head assembly.
3 Turn the center wheel counterclockwise,
and remove the retaining frame.
4 Remove and clean one set of cutters and
combs at a time.
5 Separate the cutter from the comb and
rinse clean under hot water.
◗ Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs,
it could take several weeks before optimal
shaving performance is restored.
6 Replace the set back into the Razor Head
Assembly so that the 'wings' on the comb
fit within the brackets located towards the
center of the assembly.
◗ The set will only fit into the Razor Head
Assembly if the 'wings' are between the
brackets.
Page 16 (Black plate)