Genesis GD38B Manual Del Operario página 6

Guidelines for Using Extension Cords
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate Extension Cord Length
Amperes
25 Feet
(At Full Load)
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0
SPECIFIC SAFETY RULES FOR DRILLS
WARNING:
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO
PRODUCT SAFETY RULES. If you use this tool unsafely or incorrectly, you can
suffer serious personal injury!
Hold the tool by insulated gripping surfaces when performing an
operation
Always use safety glasses or goggles.
Wear ear/hearing protectors
Hold the tool firmly
Always be sure you have firm footing
Do not hold the tool or place your hands near the rotating chuck or
drill bit.
Always check that the material being drilled is secure and clamped
in place
Never hold the workpiece in your hand, lap or against other parts of
the body
6
50 Feet 75 Feet
DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
3/8" VSR Electric Drill
Operator's Manual
100 Feet 150 Feet
GD38B
200 Feet