Always position the cord away from the rotating bit and DO NOT
wrap the cord around your arm or wrist
When using the drill, DO NOT position yourself between the tool and
a wall or post
If the bit jams or binds in the work,
Do not use dull or damaged bits and accessories.
Do not use bits larger then those recommended
When removing the drill bit from the tool avoid contact with skin
WARNING:
USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST
OR OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE
SILICA DUST AND ASBESTOS. Direct particles away from face and body.
Always operate tool in a well-ventilated area and provide for proper dust
removal. Use dust collection system wherever possible. Exposure to the dust
may cause serious and permanent respiratory or other injury, including silicosis
(a serious lung disease), cancer, and death. Avoid breathing the dust, and
avoid prolonged contact with the dust. Allowing dust to get into your mouth or
eyes, or lay on your skin may promote absorption of harmful material. Always
use properly fitting NIOSH/OSHA approved respiratory protection appropriate
for dust exposure, and wash exposed areas with soap and water.
SAVE THESE INSTRUCTIONS
7