SSS Siedle AFSV 870-0 Manual De Instrucciones página 4

English
Operating elements
a Brightness
b Colour saturation
c Door release
d Button I (Video memory)
e Button II (Not preset)
f Muting
g Speech button with "+"/"–"
Call signalling
Different ringtones help you to dif-
ferentiate between the call types
(e.g. door call (front door), storey
call (apartment door), internal/
external call). The number of call
types that are available depends on
the installation and configuration
of the system.
In the case of a storey call, an
incoming call without speech con-
nection is signalled for approx.
5 seconds.
Accept incoming calls
When there is an incoming call, the
handsfree telephone rings and the
speech button flashes. The call can
be accepted by pressing the speech
button. During the call, the speech
button is alight.
If there is an incoming door call,
the video door station's camera
image is displayed. In the case of
incoming door calls for an audio
door station or other call types, the
corresponding symbol appears on
the display.
Simultaneously incoming calls
If the "call waiting" function is
activated on the system side, then
when there is an existing connec-
tion, further calls are signalled
visually (display message) and
acoustically (call waiting tone) on
the device:
Call type
Door call
Story call, Internal
call, External call
4
Call waiting
tone
2 x long
2 x short
The pending calls in the back-
ground are signalled as a new
incoming call once the current call
is ended and can be processed
in order. Up to 10 calls can be
pending on the device. If the "call
waiting" function is not activated,
further calls are rejected with the
engaged tone.
Actuating the door release
When you press the door release
button, the door release of the
door from which the last call came
is triggered.
End call
Briefly press the speech button
once.
Muting
Pressing the 'muting' button
briefly will switch all ringtones off/
on again. If muting is active, the
button is lit.
Video memory
(Missed door calls)
Door calls for a video door station
that are not accepted are docu-
mented with a camera image in
the video memory along with date
and time.
The "I" button is preconfigured
with the video memory function.
This button flashes if there are new
images in the video memory.
The latest image is always shown
first. The video memory closes
after 60 seconds of inactivity at
the latest.
Navigation
Press button I Open/close video
memory
+ Switch to next
older image
– Switch to next
newer image