SSS Siedle AFSV 870-0 Manual De Instrucciones página 5

Execute function
Press the Function selection:
speech button • Cancel,
• Delete image*
• Delete all images
+ / – Selection of a
function
Press the Execute selected
speech button function
again
* If just one image is to be deleted,
the image to be deleted must
be displayed before the deletion
process.
Device configuration
The device is mainly configured
on the system side by the relevant
system administrator. The following
settings can be made directly on
the device:
Change ring tone volume
In idle status or if an incoming call
has not yet been accepted, the
ring tone volume can be gradually
adjusted by pressing + or – on the
speech button.
Changing the speech volume
During a call, the speech volume
can be set by pressing + or – at the
speech button.
Adjusting the brightness
Use the left-hand control dial to
adjust the display brightness.
Adjusting the colour saturation
Use the right-hand control dial to
adjust the colour saturation for the
display.
Button assignment
This device features 4 function
buttons (see "operating element"
table: c–f). 3 buttons are preset
with functions on the system
side. All function buttons are LED-
backlit for visual acknowledgement
(yellow/red, door release button
single colour).
The following functions can be
configured on the system side on
function buttons:
• Call up video memory
• Initiate switching function (e.g.
door release, light, garage door)
• Activate/deactivate doormatic
function
• Call concierge (e.g. reception)
• Direct door call for a door station
• Internal call of an internal remote
station
• Call rerouting to another call
destination
• Call silencing (Do not disturb!
– DND)
LED status displays
Statuses in which the device is not
ready for operation (where appli-
cable only temporarily) are indi-
cated with the button LEDs (c–g):
LEDs Status
Chase lighting Restarting
(c–g)
Flashing Update process
yellow/red (g)
Flashing Error/server cannot
red (g) be reached
Care instructions
Only ever clean your indoor device
using a soft cloth dampened with
mild soap solution. Dry, aggres-
sive cleaning agents and abrasive
detergents can damage the sur-
face. Detailed care instructions are
located in the download area of
www.siedle.com.
Warranty / Servicing
Statutory warranty conditions
apply.
If the device requires servicing,
contact your specialist dealer or
electrical installer.
5