Philips HR 4345/00 Manual De Instrucciones página 6

Setting the "Auto function"
15
- Switch the appliance on (fig. 15)
The indicator light above the on/off button comes on and the
display lights up orange.
The appliance starts operating at speed 1.
- Press the "Auto" button (fig. 16).
If you selected "Auto" within the first three minutes after you
switched the appliance on, the "Auto"indicator light will flash
orange for a max. of three minutes while it measures the air
quality in the room.
17
• If the air is clean, the Air Cleaner switches to the stand-by
position and the "Auto" indicator light will turn green (fig. 17).
The indicator light above the on/off button will remain on.
• If the smoke sensor detects pollution, the "Auto" indicator
light will remain orange continuously and the appliance will
switch automatically to speed 1, 2 or turbo (fig. 18).
• If you wish to quit the "Auto" function, press the "Auto" button
again.
The indicator light above this button will go out.
How to set the clock
• When connecting the Air Cleaner to the mains (and also
after a power failure) the clock must be set (again).
The indicator light above the on/off button, the clock symbol
a and the digits (00:00) will flash to indicate this.
Switch the appliance on
(fig. 19)
The clock symbol a and the
digits (00:00) remain flashing.
The display lights up.
16
18
19
20
- Press button or button
set the time (fig. 20).
The digits will scroll faster if
you press and hold the button
pressed-in longer.
- The clock time and the clock
symbol a in the display will no
longer flash (fig. 21).
- Press the "time setting" button
(M) to initiate the clock
(fig. 22).
The clock symbol a goes out.
The colon flashes to indicate
that the clock is operating.
How to change the set clock time
23
- Switch the appliance on (fig. 23)
- Press the "time setting" button (M) (fig. 24).
The clock symbol a becomes visible.
25
- Press button or button
(See "Setting the time of day".)
- Finally press the "time setting" button (M) again (fig. 26).
6
21
to
22
24
26
to set the new time (fig. 25).