Rev-A-Shelf 5707 Instrucciones De Instalación página 5

STEP 6
See Figure 6 to attach the Support
Arm to the Inside Frame using the
Connector.
First, remove the plastic cover and
occupying screw from the end of
the Bottom Holder. Then, attach
the Connector to the Bottom
Holder by re-attaching the plastic
cover and screw (See Fig. 6A).
Second, remove the M5x6.5MM
Bolt from the bottom of the Inside
Frame. Then, attach the Connector
to the Inside Frame by re-attaching
the M5x6.5MM Bolt.
Figure 6B
NOTE: For blind left application,
attach to the hole furthest on the
right. For blind right application,
attach to the hole furthest on the
left (See Fig. 6B).
Third, remove the M5x6.5MM
Bolt from the Support Arm. Then,
attach the Connector to the
Support Arm by re-attaching the
M5x6.5MM Bolt (See Fig. 6C).
Figure 6C
Figure 6A
5
INSTALLATION INSTRUCTIONS: 5707 BLIND CORNER ORGANIZER WITH SOFT CLOSE